Thursday, October 6, 2022

Flat on your back.. for hours

In 1986 (36 years ago) Record were trying to raise their profile and improve the quality of their tools.

The Gold Chip bevel edged chisels with Rosewood handles, were 3 times the price of their plastic handled cousins and twice the price of the Ash handled chisels.

Watch the video and see just how long it took me to get this one chisel back into great condition https://youtu.be/-D0QX73Pf5g

And I can honestly say they nailed it.

I've got the 6 set of these (I bought new in '87) and they hold their edge for ages. Great chisels if you can get them.

However, in the original box too... that's a huge bonus. Value now.. 🤔

Well.

After using new Narex, Ashley Iles, Lie Nielsen.. I'd price this set of 5 (in good condition) at £200.

Theres a lot to do to get them into perfect condition. And I've made a start.

New video will show just how to get the back flat again, and the edge square.

In perfect, mirror backed, 25° re-established. 30° honed.

Ferrule polished up and correct. Then with the Rosewood bought back to that satin smooth finish.

Perfect.. And the Price after restoration and tuning..

£450-500.

Note; Record also produced a Boxwood handled Gold Chip range too. Again in boxes. However, that rivalled the Sorby Boxwood handled chisels. The Rosewood was seen as the higher end, and at the time, the best you could buy.

.

.

.

#record

#recordpower

#recordmarples

#rosewood #RosewoodChisels

#rosewoodchiselhandle

#toolcollectiontuesday

#toolcollector #toolcollection

#toolcollecting #toolcollectors

#oldtoolscollector #oldtoolrestoration

Tuesday, September 13, 2022

How I make Nettle Tea

I've been rubbing my eyes a lot recently. Not sure if it's some kind of Hay- fever. Anyhow I'd not had a Nettle tea for a couple of weeks, so thought it was time to make one. Tastes great the way I make it. You'll taste more of the Honey if you put some in. It's just like drinking the water from some cooked vegetables.. But nicer.


Try it.

I've made a 2 minute video outlining the method. It's very easy. 

Watch it here

I've now got a 'Thanks $' under each video
Not all YouTube videos get this opportunity. So, I see that as they want to help me move forward. You can support £2, £5, £10 or £50 which helps me out.

One-off donation:https://www.paypal.me/TWCabinetMaker
(please choose "Personal" rather than "Purchase" else PayPal charge a transaction fee.)

Buy Me a Coffee is a method of supporting me too.
https://www.buymeacoffee.com/twcmaker

The Bio.link below takes you to my other accounts on Twitter, Instagram, blog & podcasts etc.

https://bio.link/jamie

My email is jam.hub73@gmail.com if you need to get in touch.

These videos don't make themselves and do take time. If you would like to support me I would very much appreciate your help.

I use my Huawei P30Pro (phone) for filming, sound and editing. So please try not to be too critical.
Be kind.

Thank you
Jamie

Friday, September 2, 2022

Cool tooling, shorter Vlog posts and Workshops

Gooooood morning 😁
Latest video is going down well. You're all loving the tooling to make threads. Take a look, it's very cool, and pretty old. 
You can watch it here https://youtu.be/EtrzxPag1Uw


I've spaces for workshops on Monday evenings and the afternoons of Tuesdays, Wednesdays and Thursdays. So get in quick before your best choice is taken.

So glad you guys are enjoying the short Vlogs. They will continue for a little while. As well as the normal instructional type posts.

Support is very helpful. You can follow, share, like and detailed instructions to support are in every video description.

Catch you soon.
Jamie 

Thursday, May 26, 2022

Stanley folding pocket knife

I've had this Stanley knife for about 8 years now and because its been used a lot more recently I thought it was time to share Stanleys best kept Secret.

The Stanley 0 10 958 Folding Pocket knife is not only good for marking with squares or sliding bevels, I use it for carving in some details, especially letter Carving.

Watch the video here

I've put a key ring on the end and a small clasp to attach to my keys or apron ring.

You can get them from Amazon on this link Stanley Folding Pocket Knife 0 10 598 https://www.amazon.co.uk/dp/B0001IWDBU/ref=cm_sw_r_apan_i_853CCTCYS4TWFE4WM3JQ

Set x 4 Garryflex Garryson Blocks 36, 60, 120, 240 Grit Flexible Abrasive Cleaner. (M0294) Free UK Postage https://www.amazon.co.uk/dp/B01AGC06VY/ref=cm_sw_r_apan_i_N4ZEKF9WVV4EXKHW8NS3

I'm not receiving any payment for sharing this Amazon link.

But..

If you like this video and would like to support the making of the videos, It would be greatly appreciated.

Support:

One-off donation:https://www.paypal.me/TWCabinetMaker
(please choose "Personal" rather than "Purchase" else PayPal charge a transaction fee.)

Buy Me a Coffee is a method of supporting me too.
https://www.buymeacoffee.com/twcmaker

The Bio.link below takes you to my other accounts on Twitter, Instagram, blog & podcasts etc.

https://bio.link/jamie

I use my Huawei P30Pro (phone) for filming, sound and editing.

My email is jam.hub73@gmail.com if you need to get in touch.

Thank you
Jamie

Monday, May 9, 2022

One method of fitting bases to boxes

I've got 25 boxes to make. So I make them as accurately as possible. 

There's a few tips in here for you. Some you might already do, some might be new to you.
Anyhow this is how I do it when I'm up against the clock.


As you can see I fit the base to the box while the box is settled into the inner corner of a square. Try it, it makes a huge difference. 


In the video I also share info on some of my tools. 

watch the video here

Thank you for watching. 

Jamie 

Tuesday, May 3, 2022

Sharpening Secateurs if you've never sharpened anything before..

Secateurs are a great edge tool to get started with sharpening. Its a tool you can strip down if you have the tools or just struggle a bit to get a stone into the cutting edge. Either way, you will notice a difference. And if you follow my guidelines, then it will be worth the effort. 

I find that once people understand the fundamentals of the two edges and how they work with each other, the penny has dropped. Most things that need sharpening will be a piece of cake. Try shears after this. Practice on neighbours shears, friends or relatives. Just get sharpening. Don't try scissors just yet though. They're a few steps up. Give it time. Then try on an old pair of scissors that are really blunt or have a knick in them. 


You can help me create these posts and videos by supporting me. 
Support:

One-off donation:https://www.paypal.me/TWCabinetMaker 
(please choose "Personal" rather than "Purchase" else PayPal charge a transaction fee.) 

Buy Me a Coffee is a method of supporting me too. 
https://www.buymeacoffee.com/twcmaker 

The Bio.link below takes you to my other accounts on Twitter, Instagram, blog & podcasts etc. 

https://bio.link/jamie 

I use my Huawei P30Pro (phone) for filming, sound and editing. 

My email is jam.hub73@gmail.com if you need to get in touch. 

Thank you
Jamie

Saturday, April 30, 2022

How to use a Shooting Board - Then improve it to save sharpening as often.

I needed to use my shooting board last week with one of my students. She needed to get the mitres exactly right for an internal use. So out came the shooting board.



But, with a small Oak moulding it wasn't long before the iron needed sharpening. And that's when I did an upgrade to a shooting board - Blank inserts. To use a part of the blade that was still in perfect order.

Simple really, just a couple of offcuts that lift the piece off the surface. But there's a couple of things you should do.. Here's the link

Hope you enjoy this short video

Support:

One-off donation:https://www.paypal.me/TWCabinetMaker
(please choose "Personal" rather than "Purchase" else PayPal charge a transaction fee.)

Buy Me a Coffee is a method of supporting me too.
https://www.buymeacoffee.com/twcmaker

The Bio.link below takes you to my other accounts on Twitter, Instagram, blog & podcasts etc.

https://bio.link/jamie

I use my Huawei P30Pro (phone) for filming, sound and editing.

My email is jam.hub73@gmail.com if you need to get in touch.

Thank you
Jamie

Secateurs how to sharpen

Secateurs or Pruning Shears? Whatever you call them, this is the perfect time of year to sharpen up your pruning shears. In this video I sho...