The Ultimate Upcycled bench

Part 4. Where the ideas start to become a drawing and the first joint done.

There's a lot of woodworking going on in this video. Working a few things out to transform the old bench into a chunky solid bench that is inspired by the look of the Sjöbergs Elite 2000.

Here's the link to the latest video.

https://youtu.be/BM0MRQ31IRE

If you can support me, I really do appreciate it. It means I can get on with making what I want to make. Making my dreams a reality, rather than being paid a commission to make someone else's dreams & wishes come true.

Cheers

Jamie

https://youtu.be/BM0MRQ31IRE

Sjöbergs From Scrap Part 3

To allow me to build this bench without too much moving around. I need a space for it.

Somewhere it can sit that's not in the way. 

And some of the workshop has other 'stuff' in the way, like the old headboards. #upcycling the Oak headboards is a future project, but they're in the way and I need the space. 

So, the Oak headboards get cut down. Then machined to a thickness that could be useful for drawers and door fronts on the bench. 

Then I've got some unfinished jobs in front of the machines I need to use. So they needed completing this week. 

Some useful #woodworking tips in this video too. watch the video

So let me know in the comments what you like best. 

Thank you for your support 

Jamie 

Sjöbergs From Scrap bench Part 2

Planning time. Vice, hold fasts, bench height,  and using 'pre-loved' parts.

A good understanding of what you want on bench is needed at this point, and where? The most important part. How will it all fit into the design?

And then.. I found the vice out that will be fitted to the Sjöbergs From Scrap Bench. With it being second hand and a bit untidy. I set about trying to remove the vice checks (made from Beech) an alternative way to remove them using an Axe and topping up the firewood collection at the same time.

You can watch the full video here

Thank you

Jamie 

These videos don't make themselves and do take time. If you would like to support me I would very much appreciate your help.

We hope you enjoy the video, if you did then please give us a thumbs up and leave a comment below, also consider watching a few more of our videos, that lets YouTube know that we are posting great content that people want to watch.

I've now got a 'Thanks $' under each video
Not all YouTube videos get this opportunity. So, I see that as they want to help me move forward. You can support £2, £5, £10 or £50 which helps me out.

One-off donation:https://www.paypal.me/TWCabinetMaker
(please choose "Personal" rather than "Purchase" else PayPal charge a transaction fee.)

Buy Me a Coffee is a method of supporting me too.
https://www.buymeacoffee.com/twcmaker

The Bio.link below takes you to my other accounts on Twitter, Instagram, blog & podcasts etc.

https://bio.link/jamie

My email is jam.hub73@gmail.com if you need to get in touch.

I use my Huawei P30Pro (phone) for filming, sound and editing. So please try not to be too critical.
Be kind.

Thank you
Jamie

Sjöbergs From Scrap bench

It's time. I need another bench in the workshop and I've got everything I need to make this work.

Over the next few weeks I'll be building a superb Cabinet Makers Bench.

A bench that will hold its own in a wonderful workshop and learning environment.

This video takes us through the start of this journey and I give the reasons to make a bench this way. 

I also go into the costs of all the parts I will need. 

Well worth a watch

Thank you for your support 

Jamie 

Oak & Beech boards

Well, the last projects. Will I get the last present finished..?

Chloe putting the #Beeswax finish on the #nandoschicken board

To see the finishing on the board in the picture, follow the link here

And that piece of Oak I mentioned in the video was a loose leaf off an Art Deco dining table (there were two loose and two fixed) . Gifted to me to cut up and put the Wood to good use.

The table was 3" lower than normal and the owner had tried to sell it, with no luck selling she gave it to me. I found the frame of the table was mahogany with thick cut veneers covering the long timbers.

I went through every leaf and found a very wide straight, quarter sawn piece that took the table back over 200 years. With it being Art Deco design that added another 110 years or so. And I followed the curves of the annual rings to plot the pith..

Planted around 1660.

Thank you for your support 

Jamie